Print Search
帖子排序:    
帖子发起人: 龚雅琼   发起时间: 2006-09-28 11:12 上午   回复: 0
gyq 离线,最后访问时间: 2007-3-1 14:18:45 龚雅琼

发帖数前10位

等级: 正式会员
注册: 2005-12-05
发贴: 405
Benzapon Sanofresh 石油溶剂干洗枧油
楼主  2006-09-28, 11:12 上午


Benzapon Sanofresh  石油溶剂干洗枧油

Premium soap for use in HC solvents
石油干洗专用洗涤剂(枧油)

Properties:
产品特性:

•  optimal cleaning effect
•  卓越的清洁效果
•  prevents greying
•  防发灰
•  reliable, proven and widespread deodorizing effect in the complete system
•  可靠全面的除臭效果
•  high water-binding capacity
•  强大的抱水能力
•  marked antistatic finish
•  抗静电
•  can also be applied for pre-brushing
•  也可作预刷剂

Application:
应用:

First time Addition:
首次加入
2 ml Benzapon Sanofresh/L solvent in work tank After adding Benzapon Sanofresh, circulate the solvent through the washer, filter, piping and tank system by running a wash cycle without any garments in the wheel for 5 minutes.
每升溶剂相应加入2ML的Benzapon Sanofresh,加入后,在无负载的情况下,让洗涤剂在缸体、过滤器、管道和箱体中循环约5分钟。

Topping up additive:
每次洗涤的追加量
1 % of weight of garments (e.g 100 ml/10 kg) for 2-bath process
双浴法加入织物干重的1%
0,5 % of weight of garments (e.g 50 ml/10 kg) for 1-bath process
单浴法加入织物干重的0.5%

1-bath process:
单浴法
1. Fill to high level from working tank and add 0,5 % Benzapon Sanofresh/kg garments
抽取工作箱内溶剂到达高液位后加入织物干重0,5 %的Benzapon Sanofresh。
2. Run cleaning cycle with continous filtration for 6 minutes
循环洗涤(经过滤器)约6分钟
3. Drain to the work tank
抽回工作箱
4. Extract to still
溶剂进行蒸馏
5. Drying
烘干

2-bath process:
双浴法
1. Fill to low solvent level from working tank
工作箱加液到低液位
2. Run cycle for 2-3 minutes without filtration
不经过滤循环洗涤2-3分钟
3. Drain and extract solvent to still
排液蒸馏
4. Fill from working tank to high solvent level. Note: It may be necessary to draw solvent from the distilled solvent tank as well to reach the high solvent level and add 1 % Benzapon Sanofresh/kg garments
从工作箱抽液到高液位。注意:当从清洁箱抽液至高液位进行洗涤,则要加入织物干重1%的Benzapon Sanofresh。
5. Run cleaning cycle with continous filtration for 6 minutes
循环洗涤(经过滤器)约6分钟
6. Drain and extract solvent to the work tank
排液至工作箱
7. Drying
烘干

Application of Benzapon Sanofresh as pre-brushing agent:
作预刷剂使用
If Benzapon Sanofresh is used for pre-brushing, it should be diluted 1:1 to 1:5
with hydrocarbon solvent.
如Benzapon Sanofresh作为预刷剂使用,需将其与石油溶剂进行1:1 至 1:5的配比混合后使用。

Technical data:
技术参数

Density 20 °C: 0,91 g/ml
黏度 20 °C: 0,91 g/ml
pH-value: 7,0 – 8,0
pH值7,0 – 8,0
Ionogenity: anionic
阴离子
Flashpoint: 62 °C
闪点:62 °C


Contents:
组分

Anionic, nonionic surfactants, preservatives, dissolved in hydrocarbon solvents
阴离子,非离子表面活性剂,防腐剂,溶解与碳氢溶剂
Storage:
存储
Store containers cool and tightly closed. If sealed in original packing the product can be stored for at least 24 months.
低温密闭保存,未开封时可至少保存24月

29.03.2006
Art.-No.: 817-0020

IP 地址: 已记录   报告
Cobber Forums » BUFA洗涤耗材专版 » 干洗助剂类(枧油) » Benzapon Sanofresh 石油溶剂干洗枧油